7 Ft Traditional Barrel Sauna
The seven-feet Traditional Barrel Sauna by Sauna Boréal comfortably accommodates four people and is made in Quebec with red cedar from western Canada.
Description,
Description, Specifications & Assembly
The seven-foot Traditional Sauna Boréal comfortably accommodates four people and is made in Quebec with red cedar from western Canada.
Designed to withstand our winters and naturally mold-resistant, this outdoor sauna is an excellent choice for if you're looking to install an outdoor sauna at home or at the cottage.
The cylindrical shape of the barrel reduces the time required to heat the air inside the sauna and gives a great look to your property instantly.
The sauna is delivered ready to assemble, the assembly is done using the instruction manual provided by the manufacturer and takes approximately six hours for two people. Installation requires proper preparation of the installation surface and connection of the heating system by a certified electrician (see instructions).
The Sauna Boréal line of products is our team's "go-to" for outdoor saunas, they are without a doubt our favorite line of product.
Harvia KIP 6.0 kW
The Harvia KIP heater is a traditional wall-mounted sauna heater with built-in controls. The heater is constructed with stainless steel and includes a protective stone guard. The heater has a large stone cavity for maximum heat release, and the dual wall construction allows the exterior to remain cool to the touch.
The left dial controls the temperature and the right dial is the on/off control along with a delay timer. You can set the heater to turn on up to 8 hours after it is set, and the heater will automatically shut off after 60 minutes of operation.
Specifications
The Barrel has a 6' diameter and each stave is one and a half inch thick.
Included in kit:
- Interior benches
- Comfort floor
- Backrests
- 2 Headrests
- 1 x Towel hook
- Thermal stones with purchase of heating system
Assembly
The assembly will take approximately six hours with two people building the sauna. The ground preparation is done before the assembly and the and the electrical installation has to be done by a licensed electrical contractor.